Publicité
Les langues disponibles
Les langues disponibles
Disconnect the tool from power source
and ensure the rotary tool is "OFF" be-
fore making any assembly, adjustments or changing acces-
sories. Such preventative measures reduce the risk of starting
the tool accidentally.
only 1/8" collet and collet nut. Use of the Dremel
chuck may result in damage to the attachment.
To load mandrel:
1. Unscrew and remove the nose cap 1 from the tool by twisting
it counter-clockwise until it comes off the tool (Fig. 1).
2. To loosen the collet nut, first press shaft lock button 2 and ro-
tate the collet nut 3 by hand until the lock engages the shaft
preventing further rotation (Fig. 2).
Do not engage shaft lock while the tool
is running.
3. With the shaft lock 2 engaged, loosen the collet nut 3 (turn
2610046267.indd 7
All manuals and user guides at all-guides.com
Assembly
Do not use Dremel chuck
with this attachment. Use
Fig. 1
Fig. 2
L
1
6
T
5
4
7
3
2
7
3/2/17 1:00 PM
Publicité
