All manuals and user guides at all-guides.com
Load Optimized Defaults
Use this menu to load the default values set by the mainboard manufacturer specifically for
optimal performance of the mainboard.
BIOS Setting Password
Use this menu to set BIOS setting Password.
Save & Exit Setup
Save changes to CMOS and exit setup.
Exit Without Saving
Abandon all changes and exit setup.
Frequency/Voltage Control
Current CPU Clock
It shows the current clock of CPU. Read-only.
Adjust DDR Memory Frequency
When it is set to [Manual] in High Performance Mode, user can place an artificial memory clock
limit on the system. Please note that memory is prevented from running faster than this
frequency. Setting options: [DDR266], [DDR333], [Auto].
Adjust CPU FSB Frequency
This item allows you to select the CPU Front Side Bus clock frequency (in MHz) and overclock
the processor by adjusting the FSB clock to a higher frequency. 133MHz, 137MHz, 140MHz,
200 MHz, 206MHz, 210MHz (ROM Table) for selectable.
Adjust CPU Ratio
This item lets you to adjust the CPU ratio. Setting to [Startup] enables the CPU running at the
fastest speed which is detected by system. Setting options are: [x10]~[x24].
Memory Voltage
Adjusting the DDR voltage can increase the DDR speed. Any changes made to this setting
may cause a stability issue, so changing the DDR voltage for long-term purpose is NOT
13