Publicité
EN
16
Spin function
1. After the washing process is finished, drain the water and empty the
washing drum.
2. Place the spin basket on the appliance and turn it counter-clockwise. Make
sure it is firmly in place.
3. Place the laundry in the spin basket and press down the pressure cover to
prevent the clothes from falling out during spinning. Close the top cover
and set the programme selector switch to the "Spin" position. Select the
time according to the type of clothes and start spinning. If the time setting
is too long or you want to stop halfway, turn the timer counter-clockwise
to the "off" position. Wait until the basket has stopped.
Note: The clothes should be evenly flat and covered with a pressure cover
to avoid unintentional displacement of the machine due to spinning.
4. When the spin time is up, open the cover, remove the pressure cover and
take out the clothes to dry.
5. Turn the spin basket clockwise and pull it out of the drum.
Note: Remove the basket when washing. The spin basket is only used to
drain the clothes. The appliance does not dry the clothes.
Publicité
