Hilti TE 70-AVR Notice D'utilisation Originale page 11

5.2 Fitting / removing the accessory tool
The use of unsuitable grease may cause damage to the tool. Use only genuine Hilti grease.
Always check the accessory tool for damage and uneven wear before each use; replace if necessary.
▶ Fit or remove the accessory tool, as applicable.
5.3 Drilling without hammer action
Drilling without hammer action is possible when accessory tools with a special connection end are
used. Tools of this kind are available from the Hilti tools range.
When the keyless quick-release chuck is fitted, smooth-shank drill bits for wood or steel, for example,
can be used to drill without hammer action.
▶ Set the function selector switch to the "Hammer drilling" position
5.4 Drilling with hammer action (hammer drilling)
▶ Set the function selector switch to the "Hammer drilling" position
5.5 Chisel positioning
CAUTION
Risk of injury! Loss of control over the chisel direction.
▶ Do not operate the tool when the selector switch is set to "Chisel positioning". Turn the function selector
switch until it engages in the "Chiseling" position.
The chisel can be set to 24 different positions (in 15° increments). This ensures that flat chisels and
shaped chisels can always be set to the optimum working position.
▶ Set the function selector switch to the "Chisel positioning" position
5.6 Chiseling 4
▶ Set the function selector switch to the "Chiseling" position
5.7 Control switch lock
When chiseling, the control switch can be locked in the "on" position.
▶ Press the control switch lock.
6 Care and maintenance
WARNING
Electric shock hazard! Attempting care and maintenance with the supply cord connected to a power outlet
can lead to severe injury and burns.
▶ Always unplug the supply cord before carrying out care and maintenance tasks.
Care
• Carefully remove stubborn dirt from the tool.
• Clean the air vents carefully with a dry brush.
• Use only a slightly damp cloth to clean the casing. Do not use cleaning agents containing silicone as
they can attack the plastic parts.
*2063040*
3
4
4
2063040
.
4
.
.
.
English 7