Dremel PC10 Consignes De Sécurité/D'utilisation page 19

1600A018W0AA 02-18 PC10.qxp_Layout 1 2/7/18 7:28 AM Page 19
ACCESSORY
Bristle Brush
Non-Scratch Pad
Heavy Duty Pad
Eraser Pad
ELECTRONIC MONITORING
Your tool is equipped with an internal electronic
monitoring system that helps to maximize
motor and battery performance by limiting the
current to the tool when overload and stall con-
ditions occur.
If you stall the tool for too long the tool will au-
tomatically turn off. Once this happens, simply
press and release the on/off button twice to
start the tool again, and continue using it.
All manuals and user guides at all-guides.com
Operating Instructions
When the battery becomes close to empty, the
tool may shut down automatically more fre-
quent than normal. If this happens, it is time to
recharge the tool.
= Ideal
= Acceptable
19