Publicité
Les langues disponibles
Les langues disponibles
BASICS
Initial Setup
Power Up
Weather Station
Insert the 5V Power Adapter into an outlet, and then plug it into the Power Jack on the back of the
station. Next, remove the Insulation Tab from the Station's Battery Compartment.
Thermo-Hygro Sensor
Install 2 fresh "AA" batteries according to polarity and replace battery cover. The blue LED light will
flash when transmitting.
Water Leak Sensor
Remove the front cover by twisting counter-clockwise to the unlock position. Install 2 fresh "AA"
batteries according to the polarity markings. The LED light will flash blue when batteries are inserted.
Replace front cover and turn clockwise to locked position.
Note:
It may take up to 10 minutes for your sensor data to appear on your
station's screen.
02
Publicité
