JAP Fusionesco Ascension F-SC Mode D'emploi page 15

USING THE DEEP FRYER (MANUAL PROGRAM)
1. Put the plug in a suitable outlet.
2. Press to turn on the deep fryer. Hold
3. The manual mode is the default setting of the deep fryer. Press
temperature, or press
4. Press to lengthen the time, or press
CAUTION: Hold or
5. Press to start the program, press
6. Carefully take out the basket and the grate. Use the handle. [FIG. 2]
7. Place the ingredients in the basket.
8. Carefully put the basket back in the device. Use the handle. [FIG. 3]
9. Start the desired program. Enjoy!
CAUTION:
• Do not fill the basket above the MAX sign and do not go over the amount of food indicated in the table
further down in this manual. This could influence the quality of the result.
• Make sure to check the needed preparation time and temperature for the different ingredients you use
before you start preparing them simultaneously.
• Take in any case into account that the maximal amount for each ingredient is half of the normal amount.
to turn off the deep fryer.
to lower the temperature.
to shorten the time.
to change the setting quicker.
again to pause the program.
15
to increase the