JAP Fusionesco Ascension F-SC Mode D'emploi page 12

Screen diagram
7 6
8
9
10
2 5 1 4 3
1. Turning on/off (press and hold) pause/continue.
2. Selecting preset.
NOTE: the selected preset starts to flash. Repeatedly press this button until you have reached
your desired program.
3. Temperature and time settings.
NOTE: The screen flashes alternating between the time and temperature, with related
temperature and time indication light. Then set the values with the ''4''-button and ''5''-button.
4 - 5. Adjusting temperature and time.
6. Temperature status.
NOTE: If the light is flashing the deep fryer is warming up. When the flashing stops and the light
is turned on, the deep fryer has reached the desired temperature.
7. Hot air indication.
8. Heating status.
NOTE: If visible the deep fryer is being used and heating up.
9. Time indication.
10. Menu display.
12