All manuals and user guides at all-guides.com
3.
Turn on the appliance by sliding the "ON/OFF" switch to the "ON" position.
4.
Make slow circular motions until the desired degree of frothing is reached.
Move the beater slowly and evenly up and down during the process. The
whisk should always remain in the milk.
5.
Turn off the appliance by sliding the "ON/OFF" switch to the "OFF" position.
6.
Remove the beater from the milk once it stops.
7.
Clean the appliance as described under "Cleaning and care".
5. Cleaning and Care
Note: You can clean the whisk by hand.
1.
Ensure that you have read the safety instructions before cleaning.
2.
For manual cleaning, hold the whisk in the rinsing water and turn on the
appliance. Lift the whisk from the rinsing water only after the appliance
has been switching off and has stopped. Finally, rinse the whisk with clean
water.
3.
Clean the housing of the appliance with a soft, slightly moist cloth. For
stubborn dirt, please clean using a mild detergent. Make sure that liquids
do not get into the housing.
4.
Dry all parts thoroughly before reusing the appliance or storing it.
6. Technical data
Power supply
Note: Do not use 1.2V AA rechargeable batteries, as the appliance may not func-
tion properly because of the lower voltage.
7. Safety instructions and disclaimer
Never try to open the appliance to carry out repairs or modifications. Avoid con-
tact with the mains voltage. Do not short-circuit the product. The appliance is not
waterproof, therefore please use it only in dry surroundings. Protect it from high
humidity, water and snow. Do not expose the appliance to high temperatures. Do
not expose the appliance to sudden changes in temperature or strong vibrations,
as this could damage the electronic components. Check the appliance for any dam-
age before using it. The appliance should not be used if it was subject to impact or
10
Two 1.5 AA batteries
English