Sinbo SSI 2865 Manuel D'utilisation page 8

All manuals and user guides at all-guides.com
ENGLISH
SINBO SSI 2865 DRY IRON
USER INSTRUCTION
AC230V, 50Hz, 1200W
DESPRIPTION
1. Cord cover
2. Handle
3. Temperature regulator
4. Soleplate
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions should always be followed,
including the
following:
• Please keep these instructions.
• Read all instructions.
• Before connecting the appliance. Check if the voltage indicated on the rating plate
corresponds
with the mains voltage in your home.
• The user must not leave the iron unattended while connected to the supply.
• The iron shall be used on a stable ironing board.
• The iron must be used and rested on a stable surface.
• When placing the iron on its stand, ensure that the surface on which the stand is placed
is stable.
• If the supply cord is damaged, it must be replaced by the manufacturer or its service
agent or similarly qualified person in order to avoid a hazard.
• The iron shall not be used if the iron has been dropped at any time, or if there are
visible signs of damage or if the iron is leaking. The iron shall be sent to the manufacturer
or his qualified service agent before further use.
• This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of the appliance by a
person responsible for their safety.
• Children should be supervised to ensure that they do not play with the appliance.
• Do not touch hot surfaces. Use handle or knobs.
• To protect against electrical shock, do not immerse cord, plugs, or appliances in water
or other liquid.
• Close supervision is necessary when any appliance is used by or near children.
• Unplug from outlet when not in use and before cleaning. Allow to cool before storing.
• Do not operate any appliance with a damaged cord or plug or after the appliance
malfunctions, or has been damaged in any manner. Return appliance to the factory for
examination, repair or adjustment.
- 7 -