Publicité
Les langues disponibles
Les langues disponibles
All manuals and user guides at all-guides.com
7. G ently release the elastic band and remove your finger from the
hole. The band should now be securely attached to the drive shaft.
8. Remove the ties securing the tone arm.
9. Attach the counterweight to the tone arm. This counterweight can
be tightened or loosened to adjust the pressure on the stylus.
10. P lug the supplied AC adaptor into the base unit and into a
wall socket.
11. Use the provided RCA cable to connect the base unit to the
amplifiers.
12. P lace a vinyl record onto the turntable and adjust the counterweight
so that the stylus applies the correct amount of pressure.
13. T urn the unit on using the Power On/Standby button.
14. Select PHONO and the correct record speed.
15. Turn the Start/Stop selector to Start.
16. R elease the tone arm holder, lift using the lever and move it to
your preferred location on the vinyl.
17. Gently lower the tone arm to begin playback.
17. I f the turntable does not spin, ensure that the elastic band is
correctly attached to the drive shaft as shown in the image above.
13
Publicité
