BeeWi BBH200 Manuel D'instructions page 5

other devices may damage your headphone.
When the indicator lights are solid red, your headphone is charging. When
the lights turn off, the headphone is fully charged.
4. Turning on/off your headphone
uctions to
roduct.
etooth 2.1
music hea-
g HFP and
o supports
ement).
t Bluetooth
Remark: The headphone will turn off automatically if no devices are connected
phony and
after 5 minutes in order to save power.
e routed to
ic listening
5. Pairing with a phone or other device
Before you use your headphone you must pair it up with a mobile phone or/
and another Bluetooth enabled device.
- 1. Put the headphone into pairing mode: when the headphone is turned off,
press and hold the MFB until the indicator light is blinking blue/red.
- 2. Set your mobile phone or other device to 'discover' the headphone fol-
lowing your phone's instruction guide.
- 3. Your phone will find the "BeeWi BBH200" and ask if you want to pair with
it. Accept and confirm with the passkey or PIN = 0000 (4 zeros).
Your phone or other device will confirm when pairing is complete. After succes-
sful connecting, the blue light of the headphone blinks twice every 4 seconds.
In case of unsuccessful pairing repeat steps 1 to 3.
6. Connecting with a second device
You can connect two devices at the same time to enjoy hands-free communica-
tion and music streaming, only if they are using different profiles (one is using
before you
HFP, the other AD2P). When one profile is being used by one device, it cannot
e charging
be used by another.
d as using
After having paired the headphone with your mobile phone, you can pair it
All manuals and user guides at all-guides.com
Function Operation
Press and hold the
Turn on MFB for 5 seconds till
the blue LIGHT blinks.
Press and hold the
MFB for 10 seconds
Turn off
till the red LIGHT
Blue LIGHT indicator
light will flash four
Blue LIGHT indicator
light will flash four
blinks.
LIGHT indicator
times
times
ENGLISH
5