Publicité
Les langues disponibles
Les langues disponibles
OPERATING INSTRUCTIONS
Door Open
Bin Full
Overheat
Power
Overload
TO POWER ON:
1. Connect the power cord to any standard 120 volt AC
outlet. For pluggable equipment, the socket-outlet
shall be installed near the equipment and shall be
easily accessible.
2. Toggle the main power switch on the top panel to the
ON position.
3. Press the Power button
and the LED light
4. Insert paper to activate.
SHREDDING:
1. Press the Power button
The LED will light Blue indicating "ON". The shredder
is now in AUTO mode and ready to accept paper.
2. Feed up to the maximum allowed sheets of paper for
shredding into the paper feeding throat. DO NOT exceed
maximum sheet count when shredding paper. Doing so
may cause paper to incompletely shred and possibly jam
your unit.
3. Press the
button on the control panel. The shredder
is now in Reverse mode, and the motor will move in
reverse to push out paper.
4. Press the
button on the control panel. The shredder
is now in manual forward mode, and the motor will move
forward to shred paper.
For all safety purposes, turn off shredder when
not in use.
OVERHEATING:
± The shredder will shut off and the overheat indicator
turn red if the motor becomes too hot after shredding for
more than 20 minutes.
± Let the shredder cool until the overheat indicator
off (about 60 minutes).
± The shredder will be ready to resume paper shredding by
pressing power on button when the motor has
sufficiently cooled.
Reverse
Power
Forward
to turn ON the shredder
will be Blue.
to turn ON the shredder.
EMPTYING BIN:
The shredder will shut off and the bin full indicator
light yellow if the bin becomes too full.
1. Toggle the power switch to the off position.
2. Pull out the bin and dispose of the paper shreds or
compress the shreds down.
3. Place the bin back in.
4. Toggle the power switch to on for normal operation.
CLEARING A JAM:
± When a jam occurs the shredder will automatically stop
and reverse for a few seconds. The LED light
turn Green.
± To clear jam:
1. Hold down the reverse
jam does not clear, repeat this procedure until the jam
is cleared.
2. Grasp the excess paper.
3. Pull paper out.
If the jam does not clear, unplug the machine and remove
paper manually.
Do not place your hands near the feed opening.
DOOR OPEN:
When the bin is removed or the door ajar, the Yellow LED
will light "Door Open". The shredder will not power on
until the bin is inserted.
PAPER CLIPS AND STAPLES:
IMPORTANT! This shredder should NEVER shred anything
made of metal: staples, small paperclips, industrial or
non-standard size staples, jumbo and/or butterfly paperclips,
or binder clips. ONLY paper can be inserted to be shredded,
will
otherwise damage will be caused to the blades.
MAINTENANCE:
turns
To keep your Staples
and dispose of shreds quickly, use Staples
lubricant sheets (Model# 12434) and Staples
shredder bags (Model# 22403). Apply lubricants after
30 minutes of shredding or a minimum of twice per month.
4
button for 5 seconds. If the
Brand shredder running smoothly
®
Brand shredder
®
®
will
will
Brand
Publicité
