Télécharger Imprimer la page

Staples NANOCUT SPL-NUMC6A Manuel D'utilisation page 3

Publicité

Les langues disponibles

Les langues disponibles

IMPORTANT SAFETY INSTRUCTIONS
WARNING:
Read and understand all instructions before using
this product. Save these instructions for later use,
and follow all warnings and instructions marked
on the product.
WARNING:
IMPORTANT SAFETY GUARDS
TO AVOID SERIOUS INJURY
± Please read the entire manual carefully
before operating this shredder.
± NEVER insert hand or fingers into
feed opening.
± Keep eyes protected from opening.
± Keep children and pets away from shredder
AT ALL TIMES.
± Keep personal and loose objects
(jewelry, ties, long hair, etc.) away
from entry.
± Never use flammable, petroleum-based,
canned air, or aerosol cleaners on this
product. Some agents may combust,
causing serious injury. Use only
recommended lubricant in a non-
aerosol container (see Maintenance).
± NEVER place the shredder near water or any
heat source. Avoid direct contact with water.
STOP USE IMMEDIATELY IF:
± The shredder blades become jammed with paper.
± The shredder motor makes loud and/or irregular noises
during operation.
± The shredder blades or paper guides become bent or
compromised in any way.
Continuing to operate your shredder with any of the above
conditions present could be potentially dangerous.
INSTALLATION
± Only operate this product from the type of power source
indicated on the marking label. If you are not sure of the
type of power available, consult an electrician.
± Make sure the shredder is plugged into an easily
accessible electrical wall outlet.
± Shredder must be operated only in upright position.
± To make sure the shredder has proper ventilation, place
it a minimum distance of 2 in. (5 cm) from the wall or
furniture.
SAFETY INSTRUCTIONS
± Do not exceed the recommended sheet capacity.
± Read and follow all instructions before use. Save these
instructions for later use.
± Always turn off and unplug the machine before moving,
servicing, cleaning, or anything other than normal
operation. Serious injury may result. Clean shredder
with a damp cloth, using a mild soap and water
solution.
± Do not use abrasives or petroleum-based cleaners.
± Place this product as close as possible to power source
for quick and easy unplugging.
± Turn off the power switch before removing waste bin.
It is advisable to disconnect the power cord before
opening the shredder wastebasket.
± This product should never be placed near a radiator or
other heat source.
± Do not allow anything to rest on the power cord. Do not
place the power cord where people may walk on it.
± If an extension cord is used with this product, make
sure the total ampere (amps) ratings on the products
plugged into the extension cord do not exceed the
extension cord's ampere rating.
± Do not attempt to service this product yourself,
as opening or removing covers may expose you to
risks of getting injured. Also, doing this will void the
shredder's warranty.
± Unplug this product and contact technical support
when:
• The power cord or plug is damaged or frayed.
• Liquid has been spilled on the product.
• The product has been exposed to rain.
• The product does not operate normally, even when
the operating instructions are followed.
± This shredder should be operated only with an operator
in attendance.
± Empty the waste bin regularly so that the
waste output is not impeded.
± Do not shred plastic (including credit cards),
continuous forms, adhesive labels, transparencies,
newsprint or cardboard.
ASSEMBLY
NOTE: This shredder will operate only when used with the
supplied basket. The supplied basket has a built-in safety
feature which prevents the shredder from operating if used
with any other basket or if improperly assembled.
CAUTION: This shredder contains sharp edges on the
underside of the shredder head.
The plug on the power supply cord is intended to serve
as the disconnect device, so the socket-outlet should
be installed near the equipment and should be easily
accessible.
3
6

Publicité

loading