Dell PowerVault MD3200i Guide De Mise En Route page 20

Back-Panel Connectors (Per RAID Controller Module) (continued)
Serial connector
Management Ethernet connector
Expansion
PowerVault MD32xxi
Backplane Board
Connectors
Sensors
LED Indicators
Front panel
18
Getting Started With Your System
All manuals and user guides at all-guides.com
One 6-pin mini-DIN connector
NOTE:
One 100/1000 Base-T port Ethernet for
out-of-band management of the enclosure
Supports a maximum of 96 hard drives with
any combination of PowerVault MD1200 or
PowerVault MD1220 expansion enclosures.
NOTE:
expansion enclosures.
Redundant path connectivity provides
redundant data paths to each hard drive.
• 12 or 24 SAS hard-drive connectors
• Two power supply/cooling fan
module connectors
• Two sets of RAID controller module
connectors
• One control panel connector for front LEDs
and enclosure mode switch
Two temperature sensors
• One two-color LED indicator for
system status
• Two single-color LED indicators for power
and enclosure mode
NOTE:
applicable to the PowerVault MD32xxi RAID
enclosure.
For technical support use only.
You cannot use more than seven
The enclosure mode LED is not