Oregon Scientific BAR321 / 323HGN Manuel De L'utilisateur page 19

SELECT SENSOR CHANNEL
Press CHANNEL to switch between sensors 1 - 5.
The house icon shows the selected
remote sensor.
To auto-scan between sensors, press and hold
CHANNEL for 2 seconds. Each sensor's data will be
displayed for 3 seconds. To end auto-scan, press
CHANNEL and MEMORY with the Temperature /
Humidity Area selected.
If you select a sensor that collects only
NOTE
temperature data, the humidity will not be shown.
MINIMUM / MAXIMUM RECORDS
Press MEMORY repeatedly to view current, maximum
and minimum records for the selected sensor. To clear
the records, press and hold MEMORY for 2 seconds.
A beep will sound to confirm that the memory has been
cleared.
TEMPERATURE AND HUMIDITY TREND
The trend lines are shown next to the Temperature and
Humidity readings.
BAR321/323HGN English New R2 OP
All manuals and user guides at all-guides.com
18
Black
TREND RISING
ICON
COMFORT ZONE
The Comfort Zone indicates how comfortable the climate
is, based on current temperature and humidity
measurements.
ZONE TEMPERATURE
Any
20 – 25 ° C
(68 - 77 ° F)
Any
This information is shown in the Humidity Area when
the current measurement is displayed.
18
STEADY FALLING
HUMIDITY
>70%
40 – 70%
<40%
8/17/04, 12:55 PM