Razor Indian Motorcycle EFTR MINI 2021 Manuel D'utilisation page 6

HEADLINE ASSEMBLY AND SET-UP
Attaching the Handlebars
Required Tool: 6 mm Allen Wrench (included)
1
Place the handlebars in the
handlebar clamps.
Attaching the Front Number Plate
1
Slip the cables through the slit on
the top of the number plate. Align
the holes on the fork and snap on
the number plate.
2
Align parallel to the fork and
tighten the bolts using a 6 mm Allen
wrench. When properly tightened,
the handlebars should not move
forward or backward.
4 4
WARNING: Failing to
properly adjust and tighten the bolts
that affix the handlebars can cause
you to lose control and crash.