Ego Power+ BCA1200 Mode D'emploi page 14

TROUBLESHOOTING
EN
CAUSE
PROBLEM
◾
◾
Brush cutter fails to
◾
start.
◾
◾
◾
Brush cutter stops
while cutting.
◾
◾
WARRANTY
EGO WARRANTY POLICY
Please visit the website egopowerplus.com for full terms and conditions of the EGO Warranty policy.
14
BRUSH CUTTER ATTACHMENT — BCA1200
All manuals and user guides at all-guides.com
The battery pack is not attached to the
power head.
No electrical contact between the power
head and the battery pack.
The battery pack is depleted.
The lock-off lever and trigger are not
depressed simultaneously.
The motor is overloaded.
The battery pack or the power head is
too hot.
The battery pack is disconnected from
the tool.
The battery pack is depleted.
SOLUTION
◾
Attach the battery pack to the power
head.
◾
Remove battery, check contacts and
reinstall the battery pack until it snaps
into place.
◾
Charge the battery pack with EGO
chargers listed in this manual.
◾
Press down the lock-off lever and hold
it, then depress the trigger to turn on
the brush cutter.
◾
The motor will recover when the load
is removed. For continuous working,
decrease the load on the power head.
◾
Allow the battery pack or the power
head to cool until the temperature
drops below 152°F (67°C).
◾
Re-install the battery pack.
◾
Charge the battery pack with EGO
chargers listed in this manual.