FAR NMOGE25X CI Manuel D'utilisation page 114

English
INSTALLATION
• After unpacking your appliance, examine it carefully for visible damage that may
have been caused during transport;
• Unpack the appliance completely and remove all protective materials from inside
the microwave oven.
• Place the microwave oven on a flat surface. The rear surface of appliance shall be
placed against a wall. Leave at least 30cm above the appliance and 20 cm each side
and behind to allow good ventilation. Ensure that nothing is obstructing the air
vents on the sides, top and back of the appliance. Avoid placing the microwave
oven close to other appliances generating heat. Do not use this oven outside or in
very damp or excessively hot places. Do not fit the appliance a recess or tight space.
• It is also recommended that you do not place the microwave oven near a radio,
television or magnetic fields that may create interference.
• Remove all packaging on the inside of the microwave oven.
• Before using, clean the inside of the oven with a damp cloth.
• Plug the appliance into a 230V ~ 50Hz power socket equipped with an earth.
• Then check that the microwave functions correctly.
– Place the plastic roller with the wheels into the microwave, then place the
turntable on the rotary axis. Caution: the glass turntable is fragile.
– Place a glass of water in the microwave, on the glass turntable.
– Close the door fully.
– Press once on the START button. The internal light will then switch on, the
turntables starts to turn and the microwaves will then heat the glass of water for
30 seconds while the time counts down on the display.
– At the end of cooking the alarm will beep five times and the microwave oven
will stop.
– If the microwave is functioning well, the water should be hot.
– If the microwave is not working, do not try to repair it yourself, but return it to
the After-Sales Service of the store in which you bought it.
Select a level surface that provides enough open space for the intake and/or outlet
vents.
GB-10