Publicité
Les langues disponibles
Les langues disponibles
Bluetooth operation
1. Press the
/REC. button to switch between USB/SD and BT. The blue MODE lamp
will blink when switching to the Bluetooth mode.
2. Activate the Bluetooth function on your external Bluetooth device (cell phone or other
music device).
3. Select the pairing name "SYLVANIA STT104BT" from the devices list on your external
device and tap it. If the passcode is required on some device, enter the password '0000'.
If the pairing name does not appear in the devices list, press the
switch to Bluetooth mode again.
4. Once paired successfully, the MODE lamp will stop blinking and turn to solid blue, and
two beeps will be heard. Now you can enjoy the music from your cell phone or other
devices with Bluetooth function.
5. To disconnect the connection, tap "i" after the pairing name "SYLVANIA STT104BT" and
then "Disconnect", or just turn off the Bluetooth function on the connected device, or
press the
/REC. button on the unit to switch the input way.
6. Once the Bluetooth disconnected, the MODE lamp will go back to the blinking condition,
and one beep will be heard.
AUX IN mode
1. Insert one end of the AUX cable to the earphone port on the external device, the other
end into the AUX IN port on the unit. (cable not supplied)
2. The MODE lamp will turn off, and the unit will switch to AUX IN mode automatically and
start to play music from external device. (If not, press
hearing music from the unit).
Adjust the volume to the desired level.
3.
To disconnect the connection, just turn off your external device and unplug the AUX
4.
cable from the unit. One beep will be heard and the MODE lamp start to blink. indicating
the player is switching to Bluetooth mode.
ON
OFF
Recording from Turntable Mode or AUX IN Mode
1. Insert a USB/SD card into the USB port/SD card slot.(Make sure the USB device/SD
card is rewritable and has enough space)
2.Start playback in Turntable mode or AUX IN mode.
3. Press and hold the
heard. Now the recording process starts, and the MODE lamp will keep blinking rapidly
when the recording is in process.
4. To stop recoding, you can Press the
and two beeps will be heard, indicating the recording process is stopped. The recorded
track will be played automatically (put the tone arm away from the record and back to
the armset in Turntable mode)
AUX IN
VOL
/REC. button for 3 seconds. Release the button when a beep is
/REC. button repeatedly until
or
/REC button. The MODE lamp will go off,
9
/REC. button to
...
Publicité
