Asus Xonar Phoebus Guide De Démarrage Rapide page 7

2.1.2 Connecting the TV Tuner Card
If you have a traditional PCI or PCI Express TV tuner card on your computer, you may
need to connect it to the audio card to send the tuner card's sound to your computer's
speakers.
1. Secure the PCI/PCI Express TV tuner card and screw it into the back panel.
2. Connect the audio output header from the TV tuner card to the Aux-In header of
the audio card, as shown in the figure below.
For optimum TV audio quality, Xonar uses ADC recording to digitize the signal and
loops it back to DAC playback. Please select Aux-In as the recording source in the
Xonar Audio Center's recording mixer and enable the monitoring button to pass this
signal to the audio output. Using this setup, you can even turn on sound effects such
as Pro-Logic IIx to expand the stereo TV audio to 5.1 or 7.1 channel surround sound.
TV audio on your PC will become even better than on your TV set!
U7062_Xonar-Phoebus_QSG.indb 7
All manuals and user guides at all-guides.com
ASUS Xonar Phoebus Quick Start Guide
7
18.01.2012 16:12:23 Uhr