Plamen Julia Directives Techniques page 20

Dear customers,
First of all, we would like to take this opportunity and thank you for choosing our product. The
stove you have purchased is your valuable property and that is why we would like to you to take a few
minutes and carefully study the following Instructions which will allow you to make the best of the
product.
1 TECHNICAL DESCRIPTION AND DATA
The stove is made of gray cast and is enameled to give it a rich tone.
The glass door shows the complete firebox, resulting in a full sensation of open fire. The specific
primary and secondary air supply leaves the glass clear while the fire is burning. The stove possesses
the feature of constant burning and the fire does not require re-firing for several days.
TECHNICAL DATA:
MEASUREMENTS WxHxD:
WEIGHT:
NOMINAL OUTPUT:
PRODUCTION according to EN 13 240:
FLUE GAS DISCHARGE:
The tirebox features a door made in transparent ceramic
glass resistant to temperatures up to 700°C. This type of
glass allows a wonderful view of the fire while preventing the
appearance of sparks and smoke at the same time. The
stove features primary regulator, secondary and tertiary
airflow direction regulator which regulate the air required for
combustion and the power.
Setting the air flow regulator
for 8 kW nominal power:
Primary air flow regulator
The regulator regulates the air flow through the ash tray and roast grid in the fuel direction. The
primary air flow is necessary for the combustion process. The ash tray has to be cleaned regularly in
order to prevent the ash from forming obstacles for the primary airflow. During burning of wood, the
primary air floe regulator has to be open only a little, in the contrary the wood would bur fast and the
stove could get overheated.
50x113x58 cm
107,5 kg
8 kW
1a
Ø 120 mm
Setting the air flow regulator for
Image 2
20
firing and short time following:
Image 3