Publicité
Step 2
Fasten the ENDS (A and B) to the TOP (C). Tighten four
å
TWIST-LOCK® FASTENERS.
How to use the SAUDER TWIST-LOCK
1. Insert the dowel end of the FASTENER into the hole of the
adjoining part.
NOTE: The dowel end of the FASTENER must remain fully
inserted in the hole of the adjoining part while locking
the FASTENER.
2. Tighten the FASTENER with a Phillips screwdriver as tight
as possible.
Finished edge
Page 6
®
FASTENER
Dowel end
B
Caution
Do not stand the unit upright without the
BACK fastened. The unit may collapse.
Edge with TWIST-LOCK® FASTENERS
S u r
A
411591
f a c
e w
i t h
h o l
e s
C
www.sauder.com/services
Publicité
