Publicité
Les langues disponibles
Les langues disponibles
HOW TO REPAIR A CUT OR PUNCTURE
IN YOUR INFLATABLE BOARD
Glue
1
1. Clean the area around the cut or puncture using acetone or M.E.K.
2. Draw the outline of the patch using chalk or pencil (do not use ink).
Cut the patch, cover the cut or puncture with approximately 2.5cm (1
inch) overlap on all sides.
3. Apply tape along the outline of the patch. This will prevent the glue
from spreading outside the patch area.
4
4. Apply glue on both the board and patch using a brush or other
applicator. Make sure the glue is spread evenly and completely over the
board and patch. Let the glue dry for 5 minutes.
SUPPLIES REQUIRED
• Glue (AQUASEAL® is recommended)
• Acetone or methyl ethyl ketone (M.E.K.)
• Hairdryer
• Brush
• Tape
• Spatula or spoon
• Towel
(Not provided in the SUP board package)
2
5
17
3
6
Publicité
