Samsung 6 Serie Mode D'emploi page 89

Wireless Network Setup
➣
The menu is activated only if the Samsung Infolink Wireless adapter is connected. (See page 84)
Auto Setup
➣
If you connect the LAN cable and it supports DHCP, the Internet Protocol (IP)
Settings are automatically conigured.
➣
The wireless IP sharer to be connected to this product must support DHCP.
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the ENTER
Press the ▲ or ▼ button to select "Wireless Network Setup", then press the
2.
ENTER button.
3. Press the ENTER button to select "Internet Protocol Setup".
Press the ▲ or ▼ button to select "Auto Setup", then press the ENTER
4.
button.
➣
The Internet Protocol is set automatically.
➣
Select "Access Point Select" to check the network connectivity.
(Refer to page 88)
Press the EXIT button to exit.
Manual Setup
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the ENTER
Press the ▲ or ▼ button to select "Wireless Network Setup", then press the
2.
ENTER button.
3. Press the ENTER button to select "Internet Protocol Setup".
Press the ▲ or ▼ button to select "Manual Setup", then press the ENTER
4.
button.
Press the ▲, ▼, ◄ or ► button to move to an item, and press the numeric
5.
button to conigure the selected item. Press the ENTER
➣
If you want to use a static IP address, refer to the user manual of your
wireless IP sharer.
➣
Select "Access Point Select" to check the network connectivity.
(Refer to page 88)
Press the EXIT button to exit.
All manuals and user guides at all-guides.com
English - 87
Network selection
Cable Network Setup
Wireless Network Setup
V-Chip
Caption
button.
External Settings
Entertainment
Energy Saving
PIP
SW Upgade
Internet Protocol Setup : Auto Setup
Network Test
Access Point Select
IP Address
Subnet Mask
Gateway
DNS Server
Network selection
button.
Cable Network Setup
Wireless Network Setup
V-Chip
Caption
External Settings
Entertainment
Energy Saving
PIP
SW Upgade
Internet Protocol Setup : Auto Setup
Network Test
Access Point Select
IP Address
Subnet Mask
Gateway
DNS Server
button.
Internet Protocol Setup : Manual Setup
Network Test
Access Point Select
IP Address
Subnet Mask
Gateway
DNS Server
: Wireless
►
: Off
: Off
Wireless Network Setup
Auto Setup
Manual Setup
: AP1
: 0 0 0 0
:
0 0 0 0
: 0
0 0 0
:
0 0 0 0
Move
Return
Enter
: Wireless
►
: Off
: Off
Wireless Network Setup
Auto Setup
Manual Setup
: AP1
:
0 0 0 0
:
0 0 0 0
:
0 0 0 0
: 0
0 0 0
Move
Enter Return
Wireless Network Setup
: AP1
: 0 0 0 0
:
0 0 0 0
: 0
0 0 0
:
0 0 0 0
Move
Enter Return