Publicité
Les langues disponibles
Les langues disponibles
DAB Operation
To listen to the tuned stations press the
you will skip to the previous or next stored station (including primary and secondary
station). The unit will display the station name.
Auto Scan Modes
Full scan
Searches all DAB channels in DAB Band III. Press and hold the SCAN Button for about 2
seconds to start searching.
Manual Scan
As well as the auto tune function, you can manually tune the receiver. This can help you
when aligning your aerial or when adding stations that were missed while auto tuning.
1. Press and hold the ENTER Button, the display will show Manual tune.
2. Press the
/
5A to 13F.
3. After your desired channel number is selected, press the ENTER Button
4. Press the
/
5. Once you have reached the last station in the available multiplex, it will revert back to
button.
Presetting Stations
You can store up to 10 of your favourite stations to the memory. This will enable you to
access your favourite stations quickly and easily.
1.
like to save, press and hold the PRESET Button. The display will show "Preset Empty #".
2. Press the
/
3. Press the ENTER
4. The station will be stored and the display will show "Preset # Stored".
Recalling a Preset Station
1. Once you have saved a station to one of the preset buttons, you can recall it by pressing
the PRESET Button.
/
2. Press the
3. Press the ENTER
Button to cycle through the DAB channels, which are numbered from
Button to see what stations are present in the available multiplex.
Button to select your desired preset station number.
Button to select your desired preset station number.
/
Button. Each time you press the
Manual tune mode, just press the ENTER
/
Button,
multiplex.
Publicité
