Publicité
Les langues disponibles
Les langues disponibles
Hints and Tips
Problem
No Sound
Static Sound
Sound is distorted
Desired station not
found
The display shows "Not
available"
The display is blank
Mains Supply
Output Power
Radio Frequency
Range
Adjust the volume control, it may not be turned up.
Signal reception is too low. Adjust the aerial or move the unit to
a stronger signal location.
Volume is too high. Adjust the volume control.
Weak signal. Use the Manual Tune function.
No DAB coverage in your area or poor reception. Adjust the
position of the aerial.
This may occur if the broadcaster changes the label of a service
or removes a label. The unit will try to retune or perform a scan.
Mains adapter Input 100-240 V ~ 50/60 Hz
Mains adapter Output DC 5 V
DC battery 4 x 1.5 V (AA) batteries (not included)
1 x 1W
FM 87.5 – 108 MHz
DAB Band III 174.928 – 239.200 MHz
Cause / Solution
1A
Publicité
