Publicité
Les langues disponibles
Les langues disponibles
FM Display Modes
Every time you press the INFO Button, the bottom line of the display will cycle through the
following display modes.
Frequency
This shows the frequency of the current station,
e.g. 89.80 MHz.
Audio Mode
When in FM mode, the display will show if the
station being received is in mono or stereo mode.
The receiver will automatically switch between
Stereo and Mono modes. You can however
override this function, so that you can manually
switch between Stereo and Mono modes, which is
helpful if you're listening to a poor FM signal.
To switch between mono and stereo,
press the ENTER Button once,
see on the display "
To toggle between each mode
ENTER Button
the
Radio Text
This is a scrolling message displaying
information about the current programme.
Programme Type
This describes the "Style" or "Genre" of music that
is being broadcast e.g. "Rock" or "Classical".
Signal Strength
The display will show a slide bar to indicate the
signal strength, the stronger the signal, the longer
the bar will be from left to right.
Time/Date
Time and date will show on the display.
Time and date cannot be updated in
FM mode. To ensure correct time and
date is displayed, synchronise in DAB
you will
Auto" or " Mono
".
just press
button
again.
Frequency
Audio Mode
Radio Text
Programme Type
Signal Strength
Date and Time
Publicité
