Omron Micro Air NE-U22V Guide D'utilisation page 12

How to Fill the Medication Bottle
Have you removed Mask Adapter and the supplied Mouthpiece?
1
Remove Medication Bottle
from the Main Unit.
2
Open the Mesh Cap.
Hold the medication bottle as if covering
it with your hand.
Do not open the
bottle cap.
3
Fill Medication Bottle.
Be careful to prevent the Mesh Cap from closing
as shown in the Figure.
– The maximum capacity of Medication Bottle is 7 ml.
4
Close the mesh cap.
– Be sure to check that the Mesh Cap
is engaged. If it is not engaged,
medication will leak.
(For how to assemble the Main Unit, refer to Page 8)
Press gray tabs on
both side of Medication
Bottle at the same
time lift upwards.
Lift up the mesh
cap while pressing
your thumb hard
on the brim.
Check that the
Mesh Cap is closed.
12