Look X-TRACK Entretien page 12

2
8 mm ALLEN KEY
Instructions Axle
Maintenance X-TRACK LOOK Cycle
Prevent the axle from rotating by locking it in place using the 8mm Allen key.
Remove the nut using the 8mm socket wrench.
Caution : The nut on the left pedal
unscrews counterclockwise. The nut
on the right pedal unscrews clockwise.
For routine maintenance, make sure to
keep the nut and washer. If replacing the
8 mm SOCKET
axle, use the nut and washer provided in
the 00025065 Right and Left Steel Axles
kit.