Publicité
NISSAN - NAVARRA 2014
INSTALLATION MANUAL
INSTALLATION SUPER BOLT
15
PRESS SUPER BOLTS STUDS
D
D
D
D
ATTENTION
FULL SURFACE CONTACT IS CRITICAL FOR GOOD
ADHESION PERFORMANCE. ALWAYS APPLY FIRM
PRESSURE WHEN MOUNTING ADD ON PARTS AND
TAPES.
SUPER BOLT STUDS
F
PRESS
40-50 N/cm
2
A full surface contact between tape and substrate is important for good adhesion performance. Contact is
achieved by applying pressure. In practice a pressure between 40 and 50 N/cm² is usually needed and an
application temperature between 25 and 45 °C or 77 and 113 °F is also necessary. During application, add-on
parts and tapes must have the similar temperature.
USA 800 543 9276
DATE: 02.28.19
PG.
6
Publicité
