Ameriwood HOME 5554555COM Instructions D'assemblage page 18

Step 12
11
Attached the back panel as shown nailing straight into the raw edges.
Assure that the unit is square.
Distance from corner to corner must be equal as shown.
Note: Flip the cheVt over from the previoVV Vtep before
attaching the back panel.
ameriwoodhome.com
All manuals and user guides at all-guides.com
IMPORTANT! THE BACK PANEL IS A STRUCTURAL PART OF
THIS UNIT AND MUST BE INSTALLED PROPERLY.
x24
TTA0018
NAIL
E
18
*raw edges are shaded