Ameriwood HOME 5758341COM Manuel D'instructions
  1. Manuels
  2. Marques
  3. Ameriwood HOME Manuels
  4. Ameublement d'intérieur
  5. 5758341COM
  6. Manuel d'instructions
Ameriwood HOME 5758341COM Manuel D'instructions

Ameriwood HOME 5758341COM Manuel D'instructions

Masquer les pouces

Publicité

Table des Matières

5758341COM
6 Drawer Dresser
Date of Purchase ___ / ___ / ___
Lot Number:
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Do Not Return This Product!
Contact our customer service team for help first.
Call: 1-800-489-3351 (toll free)
Monday-Friday 9am - 5pm CST
Visit: www.ameriwoodhome.com
WARNING
- Unit can tip over causing severe injury or death.
- Anchor unit to stud in wall (if instructed to).
- Do Not allow children to climb on unit.
- Put heavy items on lower shelves or drawers.
Easy
Assembly Difficulty Meter
Follow Ameriwood Home
You
Tube
B345758341COM0
Tough

Publicité

Table des Matières
loading

Manuels Connexes pour Ameriwood HOME 5758341COM

Sommaire des Matières pour Ameriwood HOME 5758341COM

  • Page 1 Tough Visit: www.ameriwoodhome.com Assembly Difficulty Meter WARNING Follow Ameriwood Home - Unit can tip over causing severe injury or death. - Anchor unit to stud in wall (if instructed to). - Do Not allow children to climb on unit. Tube...

  • Page 2: Helpful Hints

    Contact Us! Do NOT return this product! Contact our friendly customer service team first for help. Assembly Tips Call us! 1-800-489-3351 Monday-Friday 9am - 5pm CST Tube Visit ameriwoodhome.com to view the limited warranty valid in the U.S. and Canada. Helpful Hints PEOPLE NEEDED FOR ASSEMBLY: 1-2 ESTIMATED ASSEMBLY TIME: 2 HOUR...

  • Page 3: Before You Start

    Before You Start Read through each step carefully and follow the proper order Separate and count all your parts and hardware Give yourself enough room for the assembly process Have the following tools: Flat Head Screwdriver, #2 Phillips Head Screwdriver and Hammer Caution: If using a power drill or power screwdriver for screwing, please be aware to slow down and stop when screw is tight.
  • Page 4 Board Identification Not actual size Partition Left Panel Right Panel 35758341040 35758341030 35758341010 35758341020 Bottom Upper Rail Lower Rail Vertical Molding 35758341050 35757341060 35757341070 35758341080 BACK Drawer Front Drawer Back Drawer Bottom Support 35757341091 39991167065240B 35757331110 35758000120 ameriwoodhome.com Tube...
  • Page 5 Board Identification Not actual size SIDE Drawer Side 39991167346200C This piece is paperboard construction. It is not made Back Panel from wood, but is required for K575800000 the assembly of your unit. SIDE BACK SIDE ameriwoodhome.com Tube...

  • Page 6: Part List

    Part List Actual Size (x48) (x22) (x22) (x12) (x12) (x11) #A22620 #A12120 #A22610 #A22920 #A22910 #A21660 cam lock 7/16" pan head cam bolt connector connector bolt wood dowel (x60) (x24) (x6) (x12) (x44) #A21970 #A11080 #A12955 #A17100 #A21110 7/16" flat head 1-1/8"...
  • Page 7 STEP 1 (x2) (x4) (x1) (x3) Quick #A22620 #A22510 #A21660 #A12955 Assembly Proper orientation of CAM LOCK Attach all hardware as shown. Using three screws (9), attach the vertical molding (H) to the left panel (A) as shown. Please note, there are three pilot holes in the vertical molding (H) for attachment.
  • Page 8 STEP 2 Left Cabinet Member (x9) (x3) #A11080 #A56770 Attached three left cabinet members (13a) to the left panel (A) with screws (7) as shown. Marked with a "L". ameriwoodhome.com...
  • Page 9 STEP 3 (x2) (x4) (x1) (x3) Quick #A22620 Assembly #A22610 #A21660 #A12955 Attach all hardware as shown. Using three screws (9), attach the vertical molding (H) to the right panel (B) as shown. Please note, there are three pilot holes in the vertical molding (H) for attachment. Proper orientation of CAM LOCK Do not get screws #8 &...
  • Page 10 STEP 4 Right Cabinet Member (x3) (x9) #A56770 #A11080 Attach three right cabinet members (13b) to the right panel (B) with screws (7) as shown. Marked with a "R". ameriwoodhome.com...
  • Page 11 STEP 5 (x2) (x8) (x1) Quick #A22620 #A22610 #A21660 Assembly Proper orientation of CAM LOCK right surface left surface finished edge ameriwoodhome.com...
  • Page 12 STEP 6 Left Cabinet Member (x18) Right Cabinet Member #A11080 (x3) #A56770 left surface right surface Marked with a "R". Marked with a "L". finished edge ameriwoodhome.com...
  • Page 13 STEP 7 (x6) (x6) (x1) #A22610 #A22910 #A84050 Do not tighten this screw. ameriwoodhome.com...
  • Page 14 STEP 8 (x6) #A22920 You will need to tap the connector (3) with a hammer to fully insert. Be sure the connector is positioned as shown before pushing into hole. ameriwoodhome.com...
  • Page 15 STEP 9 Press the two upper rails (F) onto the top (D) as shown so the connectors (3) engage the connector bolts (4). Turn the screw in the center of the connector (3) clockwise to lock in place. Turn clockwise to lock in place. ameriwoodhome.com...
  • Page 16 STEP 10 (x8) (x6) (x6) (x4) #A22620 #A22920 #A22910 #A21660 Quick Assembly You will need to tap the connector (3) with a hammer to fully insert. Proper orientation of CAM LOCK Be sure the connector is positioned as shown before pushing into hole. ameriwoodhome.com...
  • Page 17 STEP 11 Press the lower rail (G) onto the bottom (E) as shown so the connector bolts (4) engage the connectors (3). Turn the screw in the center of the connector (3) clockwise to lock in place. Turn clockwise to lock in place. end view ameriwoodhome.com...
  • Page 18 STEP 12 Quick Assembly (x8) (x4) Proper orientation of CAM LOCK #A22620 #A21660 ameriwoodhome.com...
  • Page 19 STEP 13 Press the bottom (E) and support (L) onto the right surface of the partition (C) as shown. Turn the cam locks (1) clockwise to lock in place. right surface ameriwoodhome.com...
  • Page 20 STEP 14 Press the bottom (E) and support (L) onto the left surface of the partition (C) as shown. Turn the cam locks (1) clockwise to lock in place. left surface ameriwoodhome.com...
  • Page 21 STEP 15 Press the left panel (A) and right panel (B) onto the bottom (E) and support (L) as shown. Turn the cam locks (1) clockwise to lock in place. ameriwoodhome.com...
  • Page 22 STEP 16 (x2 sheets) #J21341 With the help of another person, press the top (D) onto the left panel (A), right panel (B) and partition (C) as shown. Turn the cam locks (1) clockwise to lock in place. Apply the paste-ons over the screws as shown. ameriwoodhome.com...
  • Page 23 STEP 17 (x44) #A21110 IMPORTANT! THE BACK PANEL IS A STRUCTURAL PART OF THIS UNIT AND MUST BE INSTALLED PROPERLY. With the help of another person, turn the unit over as shown. Position the back panel (S) as shown. Flush the bottom edge of the back panel with the edge of the bottom (E). Assure that the unit is square.
  • Page 24 STEP 18 (x24) #A12120 (x12) #A54520 Line up the drawer bracket stem with the holes in the drawer side as shown. From other side, insert screws into drawer bracket stem and tighten. SIDE SIDE ameriwoodhome.com...
  • Page 25 STEP 19 (x24) #A12120 You will be assembling six drawers. They all assemble in the same manner. Attach the left drawer side (Y) and right drawer side (Z) to the Drawer Front (I) with screws (6) as shown. Be sure the groove in the drawer sides are centered with the groove in the drawer front. SIDE SIDE ameriwoodhome.com...
  • Page 26 STEP 20 Slide the drawer bottom (K) into the groove of the drawer sides (Y&Z) and drawer front (I). SIDE finished surface SIDE ameriwoodhome.com...
  • Page 27 STEP 21 (x24) #A21970 Tap the drive fasteners (8) with a hammer to securely fasten. SIDE BACK SIDE ameriwoodhome.com...
  • Page 28 STEP 22 Left Drawer Member Right Drawer Member (x24) (x12) (x6) #A11080 #A17100 (x6) #A50515 #A56770 Drawer Slide Kit Marked with a "R". SIDE BACK SIDE Marked with a "L". ameriwoodhome.com...
  • Page 29 STEP 23 For Masonry, Concrete, or other wall materials: Consult your local hardware store for appropriate anchors to securely attach the safety bracket. (x1) #A84050 IMPORTANT: THIS UNIT MUST BE SECURE TO THE WALL TO HELP PREVENT TIPOVER. FOLLOW THESE INSTRUCTIONS TO INSTALL THE ANTI-TIPPING SAFETY BRACKET PROVIDED WITH THIS PRODUCT.
  • Page 30 STEP 24 Note: The drawer bracket holes are slotted. Drawer fronts can be adjusted by loosening screws, making needed adjustments and retightening screws. roller cabinet member drawer runner roller ameriwoodhome.com...
  • Page 31 Maximum Loads This unit has been designed to support the maximum loads shown. Exceeding these load limits could cause sagging, instability, product collapse, and/or serious injury. 75 lbs 34 kg 35 lbs 15.8 kg (each drawer) Warning: Risk of injury to persons - do not place a television on this furniture. This furniture is not approved for use with a television.
  • Page 32 Visit your local retailer's website, rate your purchased product and leave us some feedback! We would like to extend a big "Thank You" to all of our customers for taking the time to assemble this Ameriwood Home product, and to give us your valuable feedback. ameriwoodhome.com Tube...
  • Page 33 Español Cubierta Delantera Este libro de instrucciones contiene información IMPORTANTE de seguridad. Por favor lea y manténgalo para referencia en el futuro. No Regrese este producto! Comuniquese con nuestro amistoso equipo de servicio al cliente para obtener ayuda. Llamenos al: 1-800-489-3351 (Gratis) Lunes - Viernes 9am - 5pm CST Visitar: www.ameriwoodhome.com PRECAUCION Este mueble puede volcarse y causar graves heridas y/o muerte.
  • Page 34 Español Página 7 Nota: Los agujeros del soporte de la gaveta son ranurados. Los frontales de la gaveta se pueden ajustar aflojando los tornillos, hacienda los ajustes necesarios y volviendo a apretar los tornillos. vista final Página 8 Acople tres miembros del gabinete izquierdo (13a) al panel izquierdo (A) con tornillos (7) como se muestra.
  • Page 35 Español Página 17 Presione el riel inferior (G) sobre la parte inferior (D) como se muestra de manera que los conectores (4) se enganchen con los pernos de conexión (3). Gire el tornillo en el centro del conector (3) en sentido de las agujas del reloj para asegurarlo en su sitio.
  • Page 36 Español Página 24 Alinee el vástago del soporte del cajón con los orificios en el lado del cajón como se muestra. Desde el otro lado, inserte los tornillos en el vástago del soporte del cajón y apriételos. Página 25 Usted ensamblará seis gavetas. Todas ellas se ensamblan de la misma manera. Acople el lateral izquierdo (Y) y el lateral izquierdo de la gaveta (Z) al Frontal de la misma (I) con tornillos (6) como se muestra.
  • Page 37 Visite el sitio web de su tienda local, califique su comprado y denos sus comentarios! Nos gustaría enviar un gran "Agradecimiento" a todos nuestros clientes por tomarse el tiempo de ensamblar este producto de Ameriwood Home, y por darnos sus valiosos comentarios. Gracias ameriwoodhome.com...
  • Page 38 Français Couverture Avant CE LIVRET D'INSTRUCTION CONTIENT DES INFORMATIONS IMPORTANTES SUR LA SÉCURITÉ. VEUILLEZ LIRE ET GARDER POUR UNE RÉFÉRENCE FUTURE Ne retournez pas ce produit! Contactez notre équipe de service à la clientèle amicale d'abord pour obtenir de l'aide. Appelez-nous: 1-800-489-3351 (sans frais) du Lundi au Vendredi de 9h à...
  • Page 39 Français Page 8 Joindre trois parties de gauche de l'armoire (13a) au panneau gauche (A) avec les vis (7) comme indiqué. Marqués par un « L ». Page 9 Relier toutes les parties du meuble tel qu'illustré. À l'aide de trois vis (9), fixer le moulage vertical (H) au panneau droit (B) comme indiqué.
  • Page 40 Français Page 19 Appuyer ensemble la partie inférieure (E) et le support (L) sur la surface droite de la partition (C) comme illustré. Tourner les verrous à came (1) dans le sens horaire pour verrouiller. Surface de droite Page 20 Appuyer ensemble la partie inférieure (E) et le support (L) sur la surface droite de la partition (C) comme illustré.
  • Page 41 Français Page 26 Faire glisser le fond du tiroir (K) dans la rainure des côtés du tiroir (Y et Z) ainsi que la face avant du tiroir (I). Surface finie Page 27 Appuyez sur les attaches d'entraînement (8) avec un marteau pour fixer solidement. Page 29 Pour la maçonnerie, le béton ou d'autres matériaux de mur : Visiter votre quincaillerie locale pour obtenir des ancres appropriées qui permettront de fixer...

  • Page 42: Charges Maximales

    Visitez le site Web de votre détaillant local, évaluez votre produit acheté et laissez-nous quelques commentaires ! Nous tenons à offrir un grand "Merci" à tous nos clients pour avoir pris le temps d'assembler ce produit "Ameriwood Home", et de nous donner vos commentaires précieux. Merci ameriwoodhome.com...

Table des Matières