Publicité
Liens rapides
5594500COM
6 Drawer Dresser
Date of Purchase ___ / ___ / ___
Lot Number:
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Secure Your Furniture
Keep your home and family safe
with the wall anchor kit that is
included with the product.
Serious or fatal crushing injuries can
occur from tipping furniture.
WARNING: Manufacturer assumes no liability
for improper installation or excessive loads
placed on screws or bracket. This wall anchor
is not a substitute for proper adult supervision.
All manuals and user guides at all-guides.com
Do Not Return This Product!
Contact our customer service team for help first.
Call: 1-800-489-3351 (toll free)
Monday-Friday 9am - 5pm CST
Visit: www.ameriwoodhome.com
Easy
Assembly Difficulty Meter
Follow Ameriwood Home
B345594500COM0
Tough
You
Tube
Publicité
Manuels Connexes pour Ameriwood HOME 5594500COM
Sommaire des Matières pour Ameriwood HOME 5594500COM
- Page 1 Easy Tough Assembly Difficulty Meter Serious or fatal crushing injuries can occur from tipping furniture. Follow Ameriwood Home WARNING: Manufacturer assumes no liability for improper installation or excessive loads placed on screws or bracket. This wall anchor Tube is not a substitute for proper adult supervision.
- Page 2 All manuals and user guides at all-guides.com Contact Us! Do NOT return this product! Contact our friendly customer service team first for help. Assembly Tips Call us! 1-800-489-3351 Monday-Friday 9am - 5pm CST Tube Visit ameriwoodhome.com to view the limited warranty valid in the U.S. and Canada. Helpful Hints PEOPLE NEEDED FOR ASSEMBLY: 1-2 ESTIMATED ASSEMBLY TIME: 2-3 HOUR...
- Page 3 All manuals and user guides at all-guides.com Before You Start Read through each step carefully and follow the proper order Separate and count all your parts and hardware Give yourself enough room for the assembly process Have the following tools: Flat Head Screwdriver, #2 Phillips Head Screwdriver and Hammer Caution: If using a power drill or power screwdriver for screwing, please be aware to slow down and stop when screw is tight.
- Page 4 All manuals and user guides at all-guides.com Board Identification Not actual size Bottom Left Panel Right Panel 35594340030 35594340040 35594340010 35594340020 Front Base Rail Rear Base Rail Support (4) 35594340060 35594000070 35594340050 Right Base Rail Left Base Rail 35594340090 35594340080 Front Vertical Rear Vertical Molding (2)
- Page 5 All manuals and user guides at all-guides.com Board Identification Not actual size Partition Drawer Brace (6) Drawer Front (6) 35594340130 35538000121 35594333140 Side Rail (4) Apron (2) Drawer Bottom (6) 35594340160 35594340170 35594331150 This piece is paperboard construction. It is not made from wood, but is required for the assembly of your unit.
- Page 6 All manuals and user guides at all-guides.com Board Identification Not actual size This piece is paperboard construction. It is not made from wood, but is required for the assembly of your unit. ameriwoodhome.com Tube...
- Page 7 All manuals and user guides at all-guides.com Board Identification Not actual size SIDE BACK SIDE ameriwoodhome.com Tube...
- Page 8 All manuals and user guides at all-guides.com Part List Actual Size (x28) (x28) (x4) (x4) (x60) (x92) #A22620 #A22610 #A22920 #A22910 #A11080 #A12120 cam lock cam bolt connector connector bolt #6 x 7/16" screw #8 x 7/16" screw (x12) (x9) (x20) (x11) (x22)
- Page 9 All manuals and user guides at all-guides.com Part List Not actual size Left Cabinet Member Right Cabinet Member Left Drawer Member (x1) #A84050 (x12) safety bracket kit Right Drawer Member #A54520 (x6) drawer bracket #A56750 drawer slide (x6) (x2) (x1) #A50875 #A43490 #A43105...
- Page 10 All manuals and user guides at all-guides.com STEP 1 Using screw (9), attach the front vertical molding (J) and rear vertical molding (K) to the left panel (A). Please be sure to screw into the surface of the front vertical molding with the pilot holes.
- Page 11 All manuals and user guides at all-guides.com STEP 2 Using screw (9), attach the side moldings (P) to the left panel (A). Now tighten the screws that were left loose in the previous step. (x4) #A12930 * raw edges are shaded ameriwoodhome.com Tube...
- Page 12 All manuals and user guides at all-guides.com STEP 3 marked with a "L" (x3) #A56750 (x2) (x2) (x9) #A22620 #A22610 #A11080 Quick Assembly Proper orientation of CAM LOCK ameriwoodhome.com Tube...
- Page 13 All manuals and user guides at all-guides.com STEP 4 Using screw (9), attach the front vertical molding (J) and rear vertical molding (K) to the right panel (B). Please be sure to screw into the surface of the front vertical molding with the pilot holes.
- Page 14 All manuals and user guides at all-guides.com STEP 5 Using screw (9), attach the side moldings (P) to the right panel (B). Now tighten the screws that were left loose in the previous step. (x4) #A12930 ameriwoodhome.com Tube...
- Page 15 All manuals and user guides at all-guides.com STEP 6 marked with a "R" (x3) #A56750 (x2) (x2) (x9) #A22620 #A22610 #A11080 Quick Assembly Proper orientation of CAM LOCK ameriwoodhome.com Tube...
- Page 16 All manuals and user guides at all-guides.com STEP 7 (x4) (x4) (x4) #A22620 #A22610 #A22920 Postition the connector as shown before inserting. You will need to use a hammer to fully insert. Quick Assembly Proper orientation of CAM LOCK ameriwoodhome.com Tube...
- Page 17 All manuals and user guides at all-guides.com STEP 8 (x5) (x4) (x5) #A12120 #A22620 #A53600 Quick Assembly Proper orientation of CAM LOCK ameriwoodhome.com Tube...
- Page 18 All manuals and user guides at all-guides.com STEP 9 (x5) (x4) (x5) #A53600 #A22610 #A12120 ameriwoodhome.com Tube...
- Page 19 All manuals and user guides at all-guides.com STEP 10 (x4) (x1) (x2) #A22910 #A43105 #A43490 ameriwoodhome.com Tube...
- Page 20 All manuals and user guides at all-guides.com STEP 11 Press the right base rail (I) onto the bottom (D) so the connectors (3) engage the connector bolts (4). Turn the screw in the connector clockwise to lock in place. Turn screw clockwise to lock in place. finished edge ameriwoodhome.com Tube...
- Page 21 All manuals and user guides at all-guides.com STEP 12 Attach the rear base rail (G) to the right base rail (I) as shown. ameriwoodhome.com Tube...
- Page 22 All manuals and user guides at all-guides.com STEP 13 (x5) #A12120 Press the left base rail (H) onto the rear base rail (G) as shown making sure the connectors (3) in the left base rail (H) engage the connector bolt (4) in the bottom (D). Securely fasten the cam locks (1) and connectors (3).
- Page 23 All manuals and user guides at all-guides.com STEP 14 (x5) #A12120 Secure the front base rail (F) to the left and right base rails (H&I) as shown then secure to the bottom (D) with five screws (6). ameriwoodhome.com Tube...
- Page 24 All manuals and user guides at all-guides.com STEP 15 (x12) (x6) #A12120 #A53600 Do not fully tighten the screws (6) in this step. raw surface ameriwoodhome.com Tube...
- Page 25 All manuals and user guides at all-guides.com STEP 16 marked with a "R" (x3) #A56770 (x1) (x2) (x9) #A21660 #A22610 #A11080 Attach slides (18b) and cam bolts (2) to left side of Partition (M). ameriwoodhome.com Tube...
- Page 26 All manuals and user guides at all-guides.com STEP 17 marked with a "L" (x3) #A56770 (x2) (x9) (x2) #A22610 #A11080 #A22620 Turn the Partition (M) over and attch slides (18a) and cam locks (2) to right side. Quick Assembly Proper orientation of CAM LOCK ameriwoodhome.com Tube...
- Page 27 All manuals and user guides at all-guides.com STEP 18 With the help of another person, attach the partition (M) to the bottom (D) using two screws (12). If needed, adjust the apron (Q) so that the holes in the partition (M) lined up with the holes in the bottom (D). (x2) #A23030 end view...
- Page 28 All manuals and user guides at all-guides.com STEP 19 (x8) (x8) #A21660 #A22620 Quick Assembly Proper orientation of CAM LOCK ameriwoodhome.com Tube...
- Page 29 All manuals and user guides at all-guides.com STEP 20 finished edge ameriwoodhome.com Tube...
- Page 30 All manuals and user guides at all-guides.com STEP 21 (x4) #A23030 Place the left panel assembly and the right panel assembly as shown and tighten the four cam locks (1). Attach the left panel (A) and right panel (B) to the bottom (D) using 4 screws (12).
- Page 31 All manuals and user guides at all-guides.com STEP 22 Insert four long wood dowels (13) into the larger holes in the top (C). Press the two upper side moldings (R) onto the wood dowels (13) and press until seated onto the top (C).
- Page 32 All manuals and user guides at all-guides.com STEP 23 (x6) (x12) (x1) (x6) #A22610 #A12120 #A84050 #A53600 Do not fully tighten the screws (6) in this step. Do not fully tighten this screw in this step. ameriwoodhome.com Tube...
- Page 33 All manuals and user guides at all-guides.com STEP 24 If needed, adjust the apron (Q) so that it fits properly. Now tighten the screws (6) that were left loose from step 23. ameriwoodhome.com Tube...
- Page 34 All manuals and user guides at all-guides.com STEP 25 IMPORTANT! THE BACK PANEL IS A STRUCTURAL PART OF THIS UNIT AND MUST BE INSTALLED PROPERLY. (x36) #A21110 With the help of another person, carefully turn your unit over on its front side as shown. Position the back panel as shown making sure bottom edge is flush with the edge of the bottom and side edges are aligned squarely with the left and right panels.
- Page 35 All manuals and user guides at all-guides.com STEP 26 For Masonry, Concrete, or other wall materials: Consult your local hardware store for appropriate anchors to securely attach the safety bracket. IMPORTANT: THIS UNIT MUST BE SECURE TO THE WALL TO HELP PREVENT TIPOVER. FOLLOW THESE INSTRUCTIONS TO INSTALL THE ANTI-TIPPING SAFETY BRACKET PROVIDED WITH THIS PRODUCT.
- Page 36 All manuals and user guides at all-guides.com STEP 27 (x12) (x6) (x24) #A54520 #A22610 #A12120 ameriwoodhome.com Tube...
- Page 37 All manuals and user guides at all-guides.com STEP 28 (x6) (x6) (x24) Quick #A22620 #A21520 #A12120 Assembly Proper orientation of CAM LOCK SIDE SIDE ameriwoodhome.com Tube...
- Page 38 All manuals and user guides at all-guides.com STEP 29 raw surface SIDE SIDE ameriwoodhome.com Tube...
- Page 39 All manuals and user guides at all-guides.com STEP 30 (x36) #A21970 BACK SIDE SIDE ameriwoodhome.com Tube...
- Page 40 All manuals and user guides at all-guides.com STEP 31 marked with a "L" marked with a "R" (x24) (x12) (x6) #A11080 #A17400 #A56750 (x6) #A50875 BACK SIDE SIDE Attach handle after installing the drawer slides. ameriwoodhome.com Tube...
- Page 41 All manuals and user guides at all-guides.com STEP 32 roller cabinet member drawer runner roller Note: The drawer bracket holes are slotted. Drawer fronts can be adjusted by loosening screws, making needed adjustments and retightening screws. ameriwoodhome.com Tube...
- Page 42 All manuals and user guides at all-guides.com Maximum Loads This unit has been designed to support the maximum loads shown. Exceeding these load limits could cause sagging, instability, product collapse, and/or serious injury. 35 lbs 15.9 kg Per Drawer 75 lbs 34 kg Warning: Risk of injury to persons - do not place a television on this furniture.
- Page 43 Visit your local retailer's website, rate your purchased product and leave us some feedback! We would like to extend a big "Thank You" to all of our customers for taking the time to assemble this Ameriwood Home product, and to give us your valuable feedback. ameriwoodhome.com Tube...
- Page 44 All manuals and user guides at all-guides.com Español Cubierta Delantera Este libro de instrucciones contiene información IMPORTANTE de seguridad. Por favor lea y manténgalo para referencia en el futuro. No Regrese este producto! Comuniquese con nuestro amistoso equipo de servicio al cliente para obtener ayuda.
- Page 45 All manuals and user guides at all-guides.com Español Página 10 Utilizando un tornillo (9), fije la moldura vertical frontal (J) y la moldura vertical trasera (K) al panel izquierdo (A). Por favor, asegúrese de atornillar en la superficie de la moldura vertical frontal utilizando los orificios guía.
- Page 46 All manuals and user guides at all-guides.com Español Página 23 Fije el riel base frontal (F) a los rieles base izquierdo y derecho (H&I) tal y como se muestra y luego fíjelo a la parte inferior (D) con cinco tornillos (6). Página 24 No apriete totalmente los tornillos (6) en este paso.
- Page 47 All manuals and user guides at all-guides.com Español Página 34 IMPORTANTE: EL PANEL TRASERO ES UNA PARTE ESTRUCTURAL DE ESTA UNIDAD Y DEBE INSTALARSE DE FORMA APROPIADA. Con ayuda de otra persona, voltee cuidadosamente su unidad para que quede de frente tal y como se muestra.
- Page 48 Visite el sitio web de su tienda local, califique su comprado y denos sus comentarios! Nos gustaría enviar un gran "Agradecimiento" a todos nuestros clientes por tomarse el tiempo de ensamblar este producto de Ameriwood Home, y por darnos sus valiosos comentarios. Gracias ameriwoodhome.com...
- Page 49 All manuals and user guides at all-guides.com Français Couverture Avant CE LIVRET D'INSTRUCTION CONTIENT DES INFORMATIONS IMPORTANTES SUR LA SÉCURITÉ. VEUILLEZ LIRE ET GARDER POUR UNE RÉFÉRENCE FUTURE Ne retournez pas ce produit! Contactez notre équipe de service à la clientèle amicale d'abord pour obtenir de l'aide.
- Page 50 All manuals and user guides at all-guides.com Français Page 10 En utilisant la vis (9), fixez la moulure verticale avant (J) et la moulure verticale arrière (K) au panneau gauche (A). Assurez de viser dans la surface de la moulure verticale avant à l'aide des trous de guidage. Ne serrez pas entièrement les vis avant la fin de la prochaine étape.
- Page 51 All manuals and user guides at all-guides.com Français Page 23 Fixez bien la traverse avant (F) aux traverses gauche et droite (H et I) comme montré, puis fixez-la bien au fond (D) avec cinq vis (6). Page 24 Ne serrez pas entièrement les vis (6) lors de cette étape. Page 27 Avec l'aide d'une autre personne, fixez la cloison (M) au fond (D) en utilisant deux vis (12).
- Page 52 All manuals and user guides at all-guides.com Français Page 34 IMPORTANT : LE PANNEAU ARRIÈRE EST UN ÉLÉMENT STRUCTUREL DE CETTE UNITÉ ET DOIT ÊTRE INSTALLÉ CORRECTEMENT. Avec l'aide d'une autre personne, retournez prudemment votre meuble sur sa face avant comme montré. Positionnez le panneau arrière comme montré...
- Page 53 Visitez le site Web de votre détaillant local, évaluez votre produit acheté et laissez-nous quelques commentaires ! Nous tenons à offrir un grand "Merci" à tous nos clients pour avoir pris le temps d'assembler ce produit "Ameriwood Home", et de nous donner vos commentaires précieux. Merci ameriwoodhome.com...