Publicité
Les langues disponibles
Les langues disponibles
Installer's configuration menu
The parameters in the Installer's configuration menu must be modified by
qualified personnel only. Incorrect settings can result in property damage.
1. Remove the thermostat from its wallplate.
2. Place DIP switch 2 on the back of the thermostat in the up position (Installer
mode).
3. Return the thermostat to its wallplate. The first parameter is displayed.
NOTE: See pages 21 and 22 for descriptions of the Installer's configuration
parameters.
4. To modify a parameter, press the
5. To save any modification and view the next (or previous) parameter, press
(or
NEXT
PREVIOUS
6. To exit the menu, return DIP switch 2 to the down position (User mode).
NOTE: If you exit the menu without first pressing
made will not be saved.
).
or
button.
PREVIOUS
20
or
, any modification
NEXT
69-2245EF
Publicité
