Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
SPECIFIC SAFETY RULES FOR CORDLESS IMPACT
DRIVERS
WARNING:
(GAINED FROM REPEATED USE) REPLACE STRICT ADHERENCE TO PRODUCT SAFETY
RULES. If you use this tool unsafe or incorrectly, you can suffer serious personal injury!
Hold the tool by insulated gripping surfaces when performing an operation
•
where the tool may contact hidden wiring. Contact with a "live" wire will make exposed metal parts of the
tool "live" and shock the operator.
Do not leave the tool running
•
Be aware that this tool is always in an operating condition
•
have to be plugged into an electric outlet.
When operating the tool from an elevated position
•
beneath you.
Always hold the tool firmly in your hands
•
the torque of the motor as it accelerates to full speed may cause the tool to twist.
Wear eye and hearing protection
•
otherwise specified, everyday glasses provide only limited impact resistance, they are not safety glasses.
Use only certified safety equipment; eye protection equipment should comply with ANSI z87.1 standards.
Protective hearing equipment should comply with ANSI s3.19
Bits, sockets and tool get hot during operation.
•
Protect your lungs. Wear a face or dust mask
•
will reduce the risk of personal injury.
Always disconnect battery pack from tool
•
before any assembly, adjustments or changing of accessories. Following this instruction will reduce the risk
of serious personal injury.
Do not place battery tools or their batteries near fire or heat
•
risk of explosion and
Never use a battery which has been dropped or received a sharp blow.
•
damaged battery is subject to explosion. Properly dispose of a dropped or damaged battery immediately.
Use designated battery pack (Genesis™ -Model GLAB12B) and charger
•
(Genesis™- Model GLACH12B) for this tool. Use of any other batteries may result in a risk of fire.
WARNING:
designated battery and charger before using this tool. This manual contains important
safety and operating instruction for battery charger.
SAVE THESE INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS FOR CHARGER &
BATTERY
Save These Instructions.
•
your battery charger.
Before Using the battery Charger,
•
Charger, (2) Battery, and (3) Product using battery.
Use only the charger
•
manual. Do not substitute any other charger.
Do not recharge battery in damp or wet environments
•
water or rain.
Do not operate charger with damaged cord or plug
•
12V Lithium-Ion Impact Driver
Operator's Manual
DO NOT LET COMFORT OR FAMILIARITY WITH PRODUCT
. Operate the tool only when hand-held.
. Always use safety glasses with side shields. Unless
possibly personal injury.
Read and understand safety and operating instructions of
This manual contains important safety and operating instructions for
which accompanied your product or direct replacements as listed in this
, be aware of people or things
before switching the tool "ON". The reaction to
standards.
Wear gloves when touching them.
if the operation is dusty. Following this rule
or place the switch in the locked or off position
read all instructions and cautionary markings on (1) Battery
. Replace immediately.
GLID12B
, because it does not
reduce the
. This will
A
. Do not expose battery pack to
Publicité
Table des Matières
