Publicité
Les langues disponibles
Les langues disponibles
EN
2
Take the front support (2) and connect the middle computer cable (58) to
the lower computer cable (59).
Assembling the resistance cable: Turn the control on the front support (2)
to level 8. Now insert the end (tow) of the cable (32) into the retaining clip
of the lower extension cable (34). Pull the resistor cable (32) and pass it
through the cut-out in the clip of the lower cable (34). Insert the cable (32)
into the clip of the lower cable (34).
Insert the support (2) into the main part (1) and fix it hand-tight with 4
curved washers (64) and 4 Allen screws (66).
30
Publicité
