Publicité
Les langues disponibles
Les langues disponibles
connecting to power source and/or battery pack, picking up or carrying the tool.
Carrying power tools with your finger on the switch or energising power tools that have the
switch on invites accidents.
d）Remove any adjusting key or wrench before turning the power tool on. A wrench or a
key left attached to a rotating part of the power tool may result in personal injury
e) Do not overreach .Keep proper footing and balance at all times. This enables better
control of the power tool in unexpected situations .
f) Dress properly. Do not wear loose clothing or jewellery .Keep your hair, clothing
and gloves away from moving parts. Loose clothes , jewellery or long hair can be
caught in moving parts.
g) If devices are provided for the connection of dust extraction and collection
facilities , ensure these are connected and properly used . Use of dust collection can
reduce dust –related hazards .
Please read and understand owner's manual before operating the machine, keep well
the manual. Don't operate the machine until you read the manual and understand the
operating and trouble shooting for the machine.
1. TECHNICAL DATA:
ITEM NO
Rated Voltage
Rated Power
Rated no-load speed
Mixing diameter
Mixing Capacity
N.W./G.W.
2. ASSEMBLY
Position the base and handle as shown in Figure 1, insert and tighten the rod pins.
ELECTRIC PAINT MIXER
10955
230V~50Hz
370W
55rpm
T1 ∅400mm
50L
26/29.6KGS
2
GB
Publicité
