Danfoss FH-CWP Instruction page 14

The thermostat will continue the 4-event pro-
gramme based on the present time and day.
Temporarily Setting and Changing the Desired
Room Temperature
• Press or
sired room temperature value,
in the display.
• When releasing the
returns to showing the actual room temperature
.
This temperature change is only temporary and
will be maintained only until the next programmed
setting!
14
VI.CU.C2.2D
Instruction FH-CWP Thermostat
Fig. 1 anytime to change the de-
or
Produced by Danfoss Floor Heating Hydronics 05.2011
is shown
Fig. 1 the display