Danfoss FH-CWP Instruction page 13

Instruction FH-CWP Thermostat
Program 1:
• Press
Mo. Tu. We. Th. Fr. are displayed.
Program 1, Event 1:
• Use
• Press
• Use
• Press
Program 1, Event 2-4:
Repeat the Event 1 procedure for programming
Event 2-4.
Program 2:
Sa. Su. are now shown in the display.
Program 2, Event 1:
• Use
• Press
• Use
• Press
Program 2, Event 2-4:
Repeat the Event 1 procedure for programming
Event 2-4.
Produced by Danfoss Floor Heating Hydronics 05.2011
Fig. 1 for 3 seconds, the number 1 and
Fig. 1 to select the required start time.
Fig. 1 to accept this setting.
Fig. 1 to select the required temperature.
Fig. 1 to accept this setting.
Fig. 1 to select the required start time.
Fig. 1 to accept this setting.
Fig. 1 to select the required temperature.
Fig. 1 to accept this setting.
13
VI.CU.C2.2D