Danfoss FH-CWP Instruction page 10

5. ON/OFF Timer Function
The ON/ OFF timer function allows you to program
the thermostat for one period with heating turned
OFF and one period with heating turned ON per
day. During the ON period the thermostat will
regulate in relation to the set temperature and
TIMER ON will be shown in the display. During the
OFF period, the heat is off, and TIMER OFF is shown
in the display.
Turn ON the thermostat by pressing
Selecting the Simple ON/OFF Timer Mode
• Press M Fig.1 for 3 seconds.
• Select 02 = Setting an ON/OFF timing, via
Fig. 1
Setting the Clock Fig. 3
Su. Mo. Tu. We. Th. Fr. Sa.
Fig. 1 shortly, hour will flash.
• Press
• Use
• Press Fig. 1 again, minutes will flash.
• Use
Fig. 1 shortly, actual weekday will
• Press
flash.
• Use
10
VI.CU.C2.2D
Instruction FH-CWP Thermostat
is shown in the display.
Fig. 1 to select the hour.
Fig. 1 to select the minutes.
Fig. 1 to select the day of the week.
Produced by Danfoss Floor Heating Hydronics 05.2011
Fig. 1.