Samsung DW80H99 Serie Manuel D'utilisation page 11

STEP 5 UNPACKING AND INSPECTING THE DISHWASHER
Unpack the dishwasher in an open area free of obstruction both around the packaging and overhead. We
recommend that you retain all of the packing materials until the dishwasher is fully installed and operational
to ensure you have removed all the product's components from the packing materials prior to disposal.
Unpacking
1. Position the carton right-side-up with top arrows pointing upwards.
2. Unbuckle or cut the straps securing the packaging.
3. Unpack the product packaging with care.
4. Put the straps and all of the packing materials from around the dishwasher inspecting them
for any signs of damage.
5. Locate and set aside the dishwasher's kick plate. The Kick plate is attached to packing
material of the dishwasher.
6. Lift the dishwasher from the packing tray, and then place it on the fl oor.
ALWAYS LIFT THE DISHWASHER TO MOVE IT. Sliding it over rough surfaces can damage
the dishwasher's feet and sliding the feet over fi nished surfaces can, in some cases,
CAUTION
damage that fi nish or the underlying surface.
7. There is also packing inside the dishwasher that you may want to leave in place until the
dishwasher is installed.
8. DO NOT, under any circumstances, remove the sound-absorbent padding that surrounds
the exterior of the tub of the dishwasher.
Inspecting
Mechanical
1. Check the plastic base assembly to ensure that it is intact
2. Check the dishwasher's feet to ensure they are in place and can be adjusted so you can level
and secure the dishwasher.
3. Check all the visible components on the bottom of the dishwasher to ensure they are intact
and secure.
4. Check the door latch, the operation of the hinges, and confi rm the door is properly secured
to the dishwasher.
installation_DW80H9950US-00151A-02_EN_140811.indd Sec3:11 installation_DW80H9950US-00151A-02_EN_140811.indd Sec3:11
All manuals and user guides at all-guides.com
Kick plate
installing the dishwasher _11
2014-08-11 2014-08-11 7:39:29 7:39:29