Kimex 160-4075T Manuel D'utilisation page 97

SELECTSOURCE
SSIP
Command
VOLUME
GETVOLUME
VOLUMEUP
VOLUMEDOWN
SETEQMODE
GETEQMODE
GETMUTE
SETMUTE
SETBALANCE
GETBALANCE
Select source.
Set static IP,
Default Gateway
and SubnetMask
addresses (seperate
addresses with "-"
character)
AUDIO COMMANDS
Description
Set volume level.
Volume level information.
Inrease Volume Level
by 1 step (Until max
volume)
Decrease Volume Level
by 1 step
Set equalizer mode.
Get equalizer mode
Get mute status.
Toggle mute status.
Set balance value.
Get balance value.
English - 29 -
integer n (7 = HDMI1, 8
= HDMI2,9 = HDMI3, 10
= HDMI4, 19 = DP, 20 =
OPS, 26 = TYPE C )
string ( ex: 192.168.0.15-
10.0.90.5-255.255.255.0)
Parameter
integer n (0 ≤ n ≤ 100)
no parameter
no parameter
no parameter
string n (Standart, Music,
News, Theater, Game,
Custom)
no parameter
no parameter
no parameter
integer n (-50 <= n <=
50)
no parameter
#*Select external source: ...
#IP address setting Succesfull
Return
#*set volume to n
#*volume level is ...
#*volume LEVEL is
increased to ...
or
#*Volume level is at
max value. You can not
increase volume level
further. Confirmed max
volume level is ...
#*volume LEVEL is
decreased to ..
or
#*Volume level is at
min value. You can not
decrease volume level
further
#*setEQMode() set to n
or
#*The above parameter
should be one of
Standard, Music, News,
Theater, Game, Custom.
#*the equalizer mode is n
Note: Above n is one of
Standart, Music, News,
Theater, Game, Custom
#*MUTE OFF
or
#*MUTE ON
#*MUTE OFF
or
#*MUTE ON
#*set balance level to n
or
#*invalid balance level
entered
#*balance level is ...