Publicité
Les langues disponibles
Les langues disponibles
FORMATDISK
Command
Led
GETLED
SETSTANDBYLED
SETSOURCE
GETSOURCE
SETSOURCENAME
GETSOURCENAME
KEY
GETSWVERSION
GETMODELNO
Format the internal USB
disk as FAT32
GENERAL PANEL FUNCTIONS
Description
Turns the led on/off.
(Used for setting the led
status of current state)
Get led on/off state.
(Used for getting the led
status of current state)
Set Standby led status
Set source as enable/
disable.
Gets source.
Changes source name
with given index.
Gets the source name
with given index.
Send key.
Returns the software
version of panel.
Get model no.
English - 32 -
no parameter
Parameter
integer n (0 = off, 1 = on)
no parameter
string n (n = ON, n =
OFF)
string n, integer b (n =
HDMI1, n = HDMI2, n
= HDMI3, n = HDMI4,
n = DP, n = OPS, n =
TYPE-C, n = WIDI )
(b = 1(enable), b =
0(disable))
Gets source.
string n - integer m
n = New source name
m = Source index
(HDMI1 = 5, HDMI2 = 8,
HDMI3 = 9, HDMI4 = 10,
DP = 6, OPS = 7,
TYPE-C = 11, WIDI = 15)
(Example=SETSOURCE
NAME ASLI 5)
integer n
n = Source index (HDMI1
= 5, HDMI2 = 8, HDMI3
= 9, HDMI4 = 10, DP = 6,
OPS = 7, TYPE-C = 11,
WIDI = 15)
string-integer n (n = 0, n
= 1, ......, n = up, ......, n =
menu, .....ext.)
no parameter
no parameter
#*formatting is succesful.
or
#*error while formatting.
or
#*No Internal USB is
found.
Return
#*Led is ON
or
#*Led is OFF
#*LED is on
or
#*LED is off
#*Standby Led is set to
ON
or
#*Standby Led is set to
OFF
or
#*Standby Led is not set
(invalid input)
#*Selected source n
#*Enable/Disable state :b
#*source is ...
#* <old source name>
source name changed
with <new source name>
or
#*Source not available
#*Source name is ...
or
#*Source not available
n key sent
#*V...
*Model no: ...
Publicité
