Cleaning The Air Filter; Storing The Clipping Machine; Malfunctions And Repairs; Introduction - Heiniger PROGRESS Mode D'emploi

4.4 Cleaning the Air Filter

The air filter is to be found on the upper side of the motor section of the machine. The air filter
can be removed from the machine for cleaning (Illustration 11). Regularly cleaning the air
filter with a dry brush is essential. When cleaning the air filter, take care that no foreign
bodies get into the machine.
Illustr. 11+12
The machine must never be operated without the air filter!

4.5 Storing the Clipping Machine

Only store the machine in a dry place and in the case supplied. Do not switch on the
machine if you suspect any liquid has got into it. There is then a risk of an electric shock or
short circuit. Hand the clipping machine into a service centre.
Make it a habit to store the machine between use, store it well-cleaned, oiled and with
tension slackened off, in its storage case, in a clean, dry place, out of the reach of children.
Illustr. 14

5 Malfunctions and Repairs

This product has been developed and assembled using the best individual components
available. It is designed to give longevity and high performance. If spare parts are used
during the life of this product, please ensure that they are genuine Heiniger parts. Failure to
use genuine Heiniger spares may reduce the performance of this precision engineered
product and will void any warranty claim.

5.1 Introduction

Actions to be taken to rectify malfunctions are indicated in the "Rectification" column of the
malfunction lists. Those rectification notes printed on a dark background may only be carried
out by an authorised service centre.
Details of authorised service centres are to be found at the end in the "Contact Addresses"
section.

5.2 Malfunction Lists

Contact an authorised service centre in the event of malfunctions not contained in these
instructions.
10 Instruction manual PROGRESS