SOLAC AE2550 Mode D'emploi page 17

AE2550.book Page 17 Thursday, November 14, 2013 5:37 PM
USER INSTRUCTIONS
Z
This appliance has been designed exclusively to vacuum clean floors, carpets and rugs,
furniture and fabrics. Do not use it for any other purpose.
Z
Its rotating brush can remove lint, hair and pet hair embedded in carpets and rugs..
p
Never pick up live ash, splinters or other sharp objects or liquids. Do not use it to pick
up construction dust, cement, etc.
p
Never pick up lit matches or cigarette butts. Do not pick up toxic materials (e.g.
ammonia).
p
Before adding or removing any accessories or performing any maintenance task,
unplug the appliance from the mains.
p
Do not use the appliance above the height of the power cord.
p
Do not switch the cleaner on without the foam motor protection filter ( 16 )
Z
Check that the multi-purpose brush ( 22 ) is free of tangled threads, hair , animal hair.
Otherwise, cut them off carefully and remove them so that the cleaner does not become
jammed.
Z
Do not use the brush on deep pile carpets , animal hair or fringe materials.
1 To switch the cleaner on, slide the On/Off switch (3) to the desired position. The LED indicator
will light green.
ECOPOSITION (I): Optimum suction power for hard floors with lower noise level. Provides
more comfortable use and longer battery life.
TURBO position (II): Maximum suction power, suitable for cleaning carpets and rugs.
Autonomy (min)
Noise level dB (A)
i
When there is only 4 minutes of battery life left, the LED indicator (2) will light up red and flash
until the battery dies.
2 When you have finished cleaning, switch the cleaner off by sliding the On/Off switch (3) to the
O position.
3 Leave the vacuum cleaner on charge so that it has full power for its next use.
USER INSTRUCTIONS
ECOPOSITION (I) TURBO (II)
60 40
64 70
en
17