Publicité
Les langues disponibles
Les langues disponibles
6. Installation Instructions
•
Tighten all individual parts and pre-assembled parts firmly!
Check the tightness again before each training session!
•
Perform the assembly with a second, adult and sufficiently strong person.
•
•
Also perform the adjustment of heavy assemblies (e.g. the front tube with monitor)
with a second adult person.
6.1 UNPACKING AND PREPARING
•
Keep children and pets away from small parts and plastic bags.
•
Use a suitable base to protect the device and the floor.
•
Keep all parts of the packaging for a possible return for 30 days.
6.2 MOUNTING THE FEET
95
96
70
•
First person: Lift the main housing ('50'). Embrace the saddle holder with both hands. Do not lift the
housing on the knob.
•
Second person: Slide the rear stand ('102') under its receptacle.
•
Carefully lower the main casing. Prevent pinching of fingers.
•
Slide a screw ('95'), a spring washer ('96') and a washer ('97') through each hole of the receptacle into
the corresponding threaded hole of the stand.
•
Tighten the screws by hand, using an Allen key ('123').
•
Repeat the steps for the front stand ('70').
•
Lift the housing with both hands on the receptacle for the front bar. Do not lift it by the knob.
EN
#97 4X
#96 4X
#95 4X
M8x50L
#123 1X
50
97
102
DE
27
Publicité
