2
•
•
damages resulting from incorrect or improper
installation.
•
cooker top and the extractor hood is 650 mm
please refer to the paragraphs on working
dimensions and installation).
• Check that the mains voltage corresponds to
inside of the hood.
•
•
through a pipe of minimum diameter 120
as possible.
• Do not connect the extractor hood to exhaust
•
non-electrical appliances (e.g. gas burning
must be guaranteed in the room in order to
kitchen must have an opening communicating
is used in conjunction with appliances supplied
mbar to prevent fumes being drawn back into
•
• Connect the hood to the mains through a
two-pole switch having a contact gap of at
least 3 mm.
•
has to be taken into account. Regulations con-
USE
• The extractor hood has been designed exclu-
-
smells.
• Never use the hood for purposes other than
for which it has been designed.
•
when it is in operation.
•
not engulf the sides.
•
•
•
given supervision or instruction concerning
• Children should be supervised to ensure that
•
when used with cooking appliances".
•
over to the applicable collection point for the
inappropriate waste handling of this product.
• Switch off or unplug the appliance from the
tenance work.
• Clean and/or replace the Filters after the spec-
-
on the product or on its packaging
W
-
-
-
-