BorMann PRO BAT5100 Mode D'emploi page 5

EN
ATTENTION!
- Ambient temperature to ensure correct operating efficiency: +5°C +25°C (MAX 45°C).
- When the compressor is not in use, turn the main switch OFF (pos. «0»).
- Be very careful when using the compressor, as some of its parts such as the head and delivery pipes can get extremely hot. Do not touch these parts to avoid
getting scalded.
- Use the dedicated handles or grips to lift the compressor to move it around.
- If you use the compressor for painting:
a) Do not use it indoors or near naked flames.
b) Make sure that the area in which you work has a sufficient change of air.
c) Protect your nose and mouth by wearing a dedicated mask.
- When you have finished using the compressor always remember to switch it OFF and unplug it from the mains.
CAUTION
This compressor has been designed for DIY use with intermittent (not continuous) operation. The use of the compressor for more than 15 min. during one hour
is not recommended.
PNEUMATIC CONNECTIONS
Make sure that pneumatic tools for compressed air with maximum pressure characteristics that are adequate for the compressor are used. Do not attempt to
repair faulty tubes.
5
WWW.NIKOLAOUTOOLS.GR