Noise/Vibration Information - Bosch GEX 150 TURBO Professional Notice Originale

12 | English
Random orbit sanders
Orbit diameter
Sanding pad diameter
Weight according to
EPTA-Procedure 01:2014
Protection class
The specifications apply to a rated voltage [U] of 230 V. These spe-
cifications may vary at different voltages and in country-specific mod-
els.

Noise/Vibration Information

Noise emission values determined according to
EN 62841-2-4.
Typically, the A-weighted noise level of the power tool is:
Sound pressure level 81 dB(A); sound power level
92 dB(A). Uncertainty K=3 dB.
Wear hearing protection
Total vibration values a (triax vector sum) and uncertainty K
h
determined according to EN 62841-2-4: a
2
K<1.5 m/s .
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure detailed in EN 62841
Selecting the Sanding Sheet
Different sanding sheets are available, depending on the material you are working with and the required surface removal rate:
Material
– Paint
– Varnish
– Filler
– Bodyfiller
Expert for Wood
– All wood and wood-based ma-
terials (e.g. hardwood, soft-
wood, chipboard, construction
boards)
Best for Wood
– Hardwood
– Chipboard
– Construction boards
– Metal materials
1 609 92A 4KE | (30.07.2018)
and may be used to compare power tools. They may also be
GEX 150 TURBO
used for a preliminary estimation of vibration and noise
mm 4.5
emissions.
mm 150
The given vibration level and noise emission value represent
kg 2.4
the main applications of the power tool. However, if the
power tool is used for other applications, with different ap-
plication tools or is poorly maintained, the vibration level
/ II
and noise emission value may differ. This may significantly
increase the vibration and noise emissions over the total
working period.
To estimate vibration and noise emissions accurately, the
times when the tool is switched off or when it is running but
not actually being used should also be taken into account.
This may significantly reduce vibration and noise emissions
over the total working period.
Implement additional safety measures to protect the oper-
ator from the effects of vibration, such as servicing the
power tool and application tools, keeping the hands warm,
and organising workflows correctly.
2
=4 m/s ,
h
Assembly
Pull the plug out of the socket before carrying out any
u
work on the power tool.
Application
For sanding down paint
For sanding undercoats (e.g. removing brush-
strokes, paint drips and paint runs)
For final sanding of primers prior to painting
For pre-sanding, e.g. of rough and uneven
beams and boards
For surface sanding and levelling of slight irreg-
ularities
For finish-sanding and fine sanding of wood
Grit
Coarse 40
60
Medium 80
100
120
Fine 180
240
320
400
Coarse 40
60
Medium 80
100
120
Fine 180
240
320
400
Bosch Power Tools